Glass Bead Chamber Vacuum System IWK (Thailand) Ltd, Thailand 2017

IWK (Thailand) Limited have the issue with they material Glass Bead with high specific weight ratio which makes it very heavy. It also can be reused several times in the coating process by manually collecting glass bead material on the ground, production downtime increased as well as physical fatigue for the operator. Before the RUWAC solution, a large dust collector was implemented in which its task is to extract airborne glass bead powders from the entire chamber; the results were not sufficient and the operator had visibility & breathing issues …

Read More

Ruwac DAV deduster for plastic trimmings from high speed IWK tube filling machine IWK (Thailand) Ltd, Thailand 2017

At IWK (Thailand) Limited the plastic trimming pieces are evacuated much too slow from the collection chamber resulting in trimmings building lumps and clogging up the hose. This would stop the tube filler machine frequently for manual cleaning up of hose and collection chamber. Up to 10 % production time could be lost due the vacuum. Before the Ruwac solution, another de-dusting solution was implemented in which the performance & connection diameters were not carefully calculated resulting in clogged tube trimmings within the hose connections. (low mbar of under 30 …

Read More

DS6 2.2 kW with total 5 suction points at Eagle Ottawa (Thailand) Co., Ltd.

  During the process of white leather, after the coating process the white leather has to goes through an oven to dry. But during the baking process when the leather gets dry it has got small loose leather pieces which is not falling off and sticks on to the leather. The small leather pieces will give leather at the finishing process spots on it, which is not acceptable for customers buyer. RUWAC Solution Offer: Offered DS6 2.2 kW, 20m2 Pocket Filter connect to pre-filter system and then on to a …

Read More

Trumpf Ltd., received a NA7-11H wet-separator on 27th February 2018.

Our OEM customer Trumpf Ltd., a manufacturer of 3D laser sintering machines, received a NA7-11H wet-separator on 27th February 2018. The purpose of this vacuum unit is to generally clean highly explosive aluminium and titanium powders from 3D laser sintering machines, which have a minimum ignition energy of lower than 1mJ. Trumpf Ltd. says that the NA7-11H is a necessary asset when cleaning their line of 3D laser sintering machines in order to comply with special regulations regarding the handling of titanium powder and other reactive powders. In this particular …

Read More

Aerospace

Aerospace

Aplication Machine cleaning Suction from hand sander Aluminium car body sanding with sparktrap Cleaning titanium powder from laser metal sintering process Wet separation of explosive and reactive dust Aplication Packages PowerVac Success Stories Complete Dust Control for metal work shop Wet seperatoRuwac DLS1221 removes fine dust and aluminum chips inside our automotive part productr vacuum for highly explosive Titanium additives Suction Media Aluminium dust Titanium Powder for 3 D laser Carbon fine dust Reference

Dust explosion technology forum in Suzhou, China from 27.06 -29.06.2016

Dust explosion technology forum in Suzhou, China from 27.06 -29.06.2016

Jens Huhn, Group Managing Director of Ruwac Asia Group, gave a lecture during the first Suzhou dust explosion technology forum about “Prevention of dust explosions in dust collection systems and industrial vacuums when handling explosive, combusatbel or reactive suction media”. The speech also covered topics such as ATEX area zoning, European work safety regulations and risk assessment for dust collection systems.

Propack Asia June 2016 is big success for RUWAC Asia

Propack Asia June 2016 is big success for RUWAC Asia

The brand new design of the RUWAC Asia which focused on providing consultancy and advice in the field of dust collection problems, was very well received by its Thailand based and regional customers. More than 400 potential customers visited the booth during the 4 days show.

Additive

Aplication Machine cleaning Vacuum cleaning of powder processing machines Success Stories Safe vacuum cleaning in Additive Manufacturing Wet seperator vacuum for highly explosive Titanium additives Suction Media Aluminium dust Titanium Powder for 3 D laser Alumnium additive for 3 D Laser Application Packages Safe vacuum cleaning in Additive Manufacturing Wet seperator vacuum for highly explosive Titanium additives Reference


Customers

  • Pruksa
  • BOSCH
  • CPF
  • Griffith Food

Latest Projects

  • vacuum truck


Industries

  • Vehicles
  • Plastic
  • Paint
  • Rubber
  • Aerospace
  • Foundry
  • Pharmaceutical
  • Cement
  • Engineering