Ruwac DLS1221 removes fine dust and aluminum chips inside our automotive part product Bosch Automotive Steering Nanjing, China 2017

The RUWAC compressed air drive vacuum produces up to 300 mbar vacuum and can tolerate unlimited start/stops per hour as was required by the customer. RUWAC produced a special cleaning nozzle to fit exactly for this application. The smaller the cleaning nozzle diameter the more mbar performance is required. Existing small vacuums could hat much too low mbar and airvolume to be able to vacuum small dust away. Our compressed-air model offers impressive performance for all periods of use. It is extremely maneuverable and complies with all safety requirements for vacuuming all …

Read More

RUWAC / PUTZMAUS tube cleaning system for biomass boiler Thai Asahi, Thailand 2016

RUWAC Asia handed over a RUWAC industrial deduster with PUTZMAUS boiler cleaning tool to Thai Asahi Co.Ltd. , a leading tapioca starch producer in Thailand. The RUWAC / PUTZMAUS system allows for convenient, dust free and fast one man boiler cleaning operation. The PUTZMAUS boiler cleaning tool moves without any additional manpower effort back and forward inside the tube without damaging the surface. See hereto also the video under Products and Application Package : Boiler Cleaning. Workers are fully protected from boiler soot dust by the RUWAC industrial dedusting vacuum. 50 % …

Read More

Mobile central vacuum cleaning for 2 big bag packers Mitsui Phenol, Singapore 2016

Due to the quantity of chemical powders being small ( about 20 kg /day ) a very cost efficient solution was installed to serve two platforms. One DA 1300 mobile vacuum with control system, short piping system and end cap connection points for the cleaning hoses on ground and upper level. The DA 1300 RUWAC mobile vacuum with 2.6 m2 filter and control system offers a cost efficient and very durable solution. Manual cleaning is labor intensive and difficult. Wiping and scrubbing off the dust on top of the platform by hand …

Read More

DS65600 Extractor System PGI Foods International Co.,Ltd., Thailand 2017

The DS64000 Extractor System with a 24m2 Cartridge Filter Class M is connected to 4 Suction Points whereas 2 suction points are operated at the same time. The purpose of this Extractor System is to extract airborne icing sugar powder from their mixer, filling station & sifting station. PGI Foods International Co.,Ltd. received a DS64000 Zone 22 Extractor System by Khun May (Right), Production Supervisor said that our RUWAC extractor system has decreased the dust cloud within the small production area, which resulted in a healthier more productive working environment. …

Read More

DS 1220 spark trap vacuum for aluminium car body sanding Autoland, Singapore 2016

The RUWAC DS 1220 sparktrap vacuum is the standard vacuum for aluminium body repair work shops certified by major Car producers such as Audi, Mercedes and BMW. The RUWAC spark trap vacuums can be used for a variety of vacuum and Dedusting tasks, where sparks are present in the suction air. For every ATEX vacuum the introduction of ignition sources with the suction air must be 100 % ruled out by the user. In situations, where this is not possible the spark trap vacuum can be one of the safe …

Read More

Central dust extraction for seasoning powders Griffith, Thailand 2016

Industries Food Chemical Paint Engineering Original Equipment Manufacturer Packaging Pharmaceutical Plastic Rubber Application Central extraction Dedusting from packing machine Extraction of dust from mixer Extraction of airborne dust with extraction arm for up to 410 cbm/h Application Category Extraction of airborne dust Suction Media Aerosil R 208 adhesive powder Carbon fine dust Cement dust Cement fine dust Copper Dust Flour Food additives Food ingredients mixtures with sugar Hygroscopic seasoning powder Mortar fine powder Polyethelene powder Polymer powders PVC powder Spice mixture Starch powder Stevia powder Sugar dust Synthetic Amorphous Silica …

Read More

Centralize Vacuum in car chassis production line Honda, Malaysia 2017

Honda, Malaysia have each operator had to work with a small standard vacuum with low capacity and small filters. The vacuum requires daily maintenance, filter changes and frequent replacement. The RUWAC industrial vacuum DS 1750 with high vacuum and airvolume with automatic start/stop control and piping system for several suction points to replacing existing small standard vacuums. Central Vacuum Systems always need very careful planning. This section can only provide examples of the most typical versions for Dedusting, Vacuum and Extraction applications with pipelines. Industries Automotive Parts Aerospace Industry Vehicles Application …

Read More

Post with a single image

Which Vacuum Should I Use for Drywall Sanding?

When it comes to indoor construction, drywall sanding is among the messiest jobs. It can create a great deal of fine dust covering your work space, and on top of the obvious nuisance of cleaning it up, there’s also the health hazard these kinds of dusty environments can create for anyone working around the area. Traditional Shop-Vacs have long been the go-to, but are they really the best vacuum for the job? The short answer is no. Due to the nature of the paint on drywalls and the fine dust …

Read More


Customers

  • AZO
  • BASF
  • CPF
  • Pruksa

Latest Projects

  • vacuum truck


Industries

  • Cement
  • Machinery
  • Plastic
  • Aerospace
  • Pharmaceutical
  • Chemical
  • Power Plant
  • Food