Ruwac DLS1221 removes fine dust and aluminum chips inside our automotive part product Bosch Automotive Steering Nanjing, China 2017

The RUWAC compressed air drive vacuum produces up to 300 mbar vacuum and can tolerate unlimited start/stops per hour as was required by the customer. RUWAC produced a special cleaning nozzle to fit exactly for this application. The smaller the cleaning nozzle diameter the more mbar performance is required. Existing small vacuums could hat much too low mbar and airvolume to be able to vacuum small dust away. Our compressed-air model offers impressive performance for all periods of use. It is extremely maneuverable and complies with all safety requirements for vacuuming all …

Read More

DS 1220 spark trap vacuum for aluminium car body sanding Autoland, Singapore 2016

The RUWAC DS 1220 sparktrap vacuum is the standard vacuum for aluminium body repair work shops certified by major Car producers such as Audi, Mercedes and BMW. The RUWAC spark trap vacuums can be used for a variety of vacuum and Dedusting tasks, where sparks are present in the suction air. For every ATEX vacuum the introduction of ignition sources with the suction air must be 100 % ruled out by the user. In situations, where this is not possible the spark trap vacuum can be one of the safe …

Read More

Aerospace

Aerospace

Aplication Machine cleaning Suction from hand sander Aluminium car body sanding with sparktrap Cleaning titanium powder from laser metal sintering process Wet separation of explosive and reactive dust Aplication Packages PowerVac Success Stories Complete Dust Control for metal work shop Wet seperatoRuwac DLS1221 removes fine dust and aluminum chips inside our automotive part productr vacuum for highly explosive Titanium additives Suction Media Aluminium dust Titanium Powder for 3 D laser Carbon fine dust Reference

Aerospace

Aerospace

Aplication Machine cleaning Suction from hand sander Aluminium car body sanding with sparktrap Car body sanding and polishing Central dedusting from hand held sanders with many suction points Central extraction Cleaning titanium powder from laser metal sintering process Extraction of airborne dust with extraction arm for up to 410 cbm/h Success Stories Complete Dust Control for metal work shop Ruwac DLS1221 removes fine dust and aluminum chips inside our automotive part product Suction Media Aluminium dust Titanium Powder for 3 D laser Alumnium additive for 3 D Laser Carbon fine …

Read More


Customers

  • BOSCH
  • AZO
  • Pruksa
  • BASF

Latest Projects

  • vacuum truck


Industries

  • Animal Feed
  • Paint
  • Cement
  • Steel
  • Foundry
  • Engineering
  • Power Plant
  • Packaging
  • Pharmaceutical