Ruwac DAV deduster for plastic trimmings from high speed IWK tube filling machine IWK (Thailand) Ltd, Thailand 2017

Plastic trimming pieces are evacuated much too slow from the collection chamber resulting in trimmings building lumps and clogging up the hose. This would stop the tube filler machine frequently for manual cleaning up of hose and collection chamber. Up to 10 % production time could be lost due the vacuum. Before the Ruwac solution, another de-dusting solution was implemented in which the performance & connection diameters was not carefully calculated resulting in clogged tube trimmings within the hose connections. The RUWAC DAV was tested and customized for this application. The RUWAC …

Read More

Ruwac DLS1221 removes fine dust and aluminum chips inside our automotive part product Bosch Automotive Steering Nanjing, China 2017

The RUWAC compressed air drive vacuum produces up to 300 mbar vacuum and can tolerate unlimited start/stops per hour as was required by the customer. RUWAC produced a special cleaning nozzle to fit exactly for this application. The smaller the cleaning nozzle diameter the more mbar performance is required. Existing small vacuums could hat much too low mbar and airvolume to be able to vacuum small dust away. Our compressed-air model offers impressive performance for all periods of use. It is extremely maneuverable and complies with all safety requirements for vacuuming all …

Read More

Mobile central vacuum cleaning for 2 big bag packers Mitsui Phenol, Singapore 2016

Due to the quantity of chemical powders being small ( about 20 kg /day ) a very cost efficient solution was installed to serve two platforms. One DA 1300 mobile vacuum with control system, short piping system and end cap connection points for the cleaning hoses on ground and upper level. The DA 1300 RUWAC mobile vacuum with 2.6 m2 filter and control system offers a cost efficient and very durable solution. Manual cleaning is labor intensive and difficult. Wiping and scrubbing off the dust on top of the platform by hand …

Read More

Efficient extraction system for fine dust Khonkaen Brewery (Singha Beer), Thailand 2016

Due to the contamination of surrounding areas and non performing existing central dust extraction systems. Workers get exposed to hazardous chemical dust. The task to charging of preservation additives into product storage tanks, excess airborne dust must be extracted continuously and safely. The DS 6 extractor with 4000 cbm/h air volume and fully automatic filter cleaning system for 24 h operation. Control system which controls the opening and closing of extraction valves automatically and RUWAC DS6 come with high efficiency cartridge filter extractor with separate filter compartments for extra long …

Read More

Dust extraction and vacuum cleaning in powder charging area AZO, Thailand 2016

Many different types of powders and fly dust some with sticky and hygroscopic properties. AZO, Thailand was looking for a compact but powerful machine to extract fly dust during manual powder charging of mixers and other production machines. The same machine should be able to be used for vacuum cleaning around the charging area and dust class requirement is H and clean room. The DS 1400 RUWAC mobile vacuum with 2.6 m2 filter , extraction arm , cleaning accessories and prefilter High airvolume suitable for small dust extraction task as well …

Read More

Glass Bead Chamber Vacuum System IWK (Thailand) Ltd, Thailand 2017

IWK (Thailand) Limited have the issue with they material Glass Bead with high specific weight ratio which makes it very heavy. It also can be reused several times in the coating process by manually collecting glass bead material on the ground, production downtime increased as well as physical fatigue for the operator. Before the RUWAC solution, a large dust collector was implemented in which its task is to extract airborne glass bead powders from the entire chamber; the results were not sufficient and the operator had visibility & breathing issues …

Read More

Ruwac DAV deduster for plastic trimmings from high speed IWK tube filling machine IWK (Thailand) Ltd, Thailand 2017

At IWK (Thailand) Limited the plastic trimming pieces are evacuated much too slow from the collection chamber resulting in trimmings building lumps and clogging up the hose. This would stop the tube filler machine frequently for manual cleaning up of hose and collection chamber. Up to 10 % production time could be lost due the vacuum. Before the Ruwac solution, another de-dusting solution was implemented in which the performance & connection diameters were not carefully calculated resulting in clogged tube trimmings within the hose connections. (low mbar of under 30 …

Read More

RUWAC / PUTZMAUS tube cleaning system for biomass boiler at Thai Asahi, Thailand 2016

  Thai Asahi, Thailand has the problem with the old biomass boiler cleaning pole which has consume lots of time and man power for the cleaning process of the boiler. Two men power and one-hole day they have needed to clean the boiler. The PUTZMAUS boiler cleaning solution integrated with the RUWAC direct suction system makes regular cleaning of any kind of boiler tubes easy, efficient and environmental friendly. All residues are pushed to the front end of the tube by PUTZMAUS and are vacuumed into a pre-separation bin by …

Read More


Customers

  • Griffith Food
  • BASF

Latest Projects

  • vacuum truck


Industries

  • Metal Working
  • Rubber
  • Foundry
  • Plastic
  • Machinery
  • Automotive Parts
  • Animal Feed
  • Chemical
  • Original Equipment Manufacturer