Ruwac Asia Blog
DS 1220 spark trap vacuum for aluminium car body sanding Autoland, Singapore 2016
- February 13, 2018
- Aerospace Industry, Automotive Parts, Car body sanding and polishing, DS 1220 spark trap vacuum for aluminium car body sanding, News, Success Stories, Vehicles
The RUWAC DS 1220 sparktrap vacuum is the standard vacuum for aluminium body repair work shops certified by major Car producers such as Audi, Mercedes and BMW. The RUWAC spark trap vacuums can be used for a variety of vacuum and Dedusting tasks, where sparks are present in the suction air. For every ATEX vacuum the introduction of ignition sources with the suction air must be 100 % ruled out by the user. In situations, where this is not possible the spark trap vacuum can be one of the safe …
Centralize Vacuum in car chassis production line Honda, Malaysia 2017
- February 1, 2018
- Automotive Industry, Car body sanding and polishing, Central System, Success Stories, Vacuum cleaning of floors and surfaces
Honda, Malaysia have each operator had to work with a small standard vacuum with low capacity and small filters. The vacuum requires daily maintenance, filter changes and frequent replacement. The RUWAC industrial vacuum DS 1750 with high vacuum and airvolume with automatic start/stop control and piping system for several suction points to replacing existing small standard vacuums. Central Vacuum Systems always need very careful planning. This section can only provide examples of the most typical versions for Dedusting, Vacuum and Extraction applications with pipelines. Industries Automotive Parts Aerospace Industry Vehicles Application …
