Ruwac Asia Blog
Saint-Gobain Abrasives (TH) Co.,Ltd. received a DS2 Wet-Separator Vacuum System.
- January 26, 2018
- Picture of the week
The DS2 Wet-Separator Vacuum System is connected to 4 Suction Points whereas 1 suction point is operated at the same time. The purpose of this Vacuum System is to de-dust grinding sparks from their QC Testing Room. Khun Darunee (Right), EHS Specialist said that our Ruwac vacuum system is essential to their operation due to compliance with ATEX regulations as well as extreme worker protection.
The first RUWAC DAV deduster for continuous suction of trimmings to IWK Thailand.
- January 26, 2018
- Picture of the week, Products
Mr Jens Huhn handed over the first RUWAC DAV deduster for continuous suction of trimmings to IWK Thailand. IWK is the world leading manufacturer of turn key tube filling and packing lines. The decision for RUWAC was made after extensive testing at IWK’s production plant in Thailand.
The DA1300 Dust-Ex Zone 22 is combined with a 110L Pre-separator/Filter System
- January 26, 2018
- News, Picture of the week
Whereas 2 operation modes can be switched manually by a ball valve: Cleaning of PE pellets from Big-Bag unloading station with Pre-Separator Cleaning of sticky nylon powders from Film Printing line with Pre-Filter The purpose of the DA1300 Vacuum Unit is to generally clean both areas mentioned above with 1 vacuum unit Thai Polyamide Team says that our Ruwac vacuum unit has eliminated electrocutions from cleaning due to our vacuum units’ full conductivity system & increased cleaning efficiency
Supplier day at Ciba Vision Singapore
- October 27, 2017
- News
On 27.10.2017 Mr. Jens Huhn, Group Managing Director of Ruwac Asia Group, and Mr. Musab Mohd Saat, Service and Sales Support Executive of Ruwac PTE Singapore, attended the regional supplier day at Ciba Vision in Singapore. Ciba Vision is a global customer of Ruwac for over 30 years.
Regional marketing and sales training seminar held at RUWAC Asia headquarters in Chonburi, Thailand
- July 24, 2017
- News
From 17. – 23.07.2017 Sales and marketing executives from Thailand, China and Malaysia came together for a week of intensive training and experience sharing at RUWAC Asia headquarters in Chonburi, Thailand.
RUWAC Asia at Propak Bangkok exhibition in June 2017
- June 15, 2017
- News
Once again RUWAC Asia participated in the Propak fair at Bitec exhibition center in Bangkok, Thailand. With even more customers meeting us at Propack than last year, the event was once again a huge success for the RUWAC brand in Asia.
Trumpf Ltd., received a NA7-11H wet-separator on 27th February 2018.
- March 15, 2017
- Picture of the week
Our OEM customer Trumpf Ltd., a manufacturer of 3D laser sintering machines, received a NA7-11H wet-separator on 27th February 2018. The purpose of this vacuum unit is to generally clean highly explosive aluminium and titanium powders from 3D laser sintering machines, which have a minimum ignition energy of lower than 1mJ. Trumpf Ltd. says that the NA7-11H is a necessary asset when cleaning their line of 3D laser sintering machines in order to comply with special regulations regarding the handling of titanium powder and other reactive powders. In this particular …
Dust explosion technology forum in Suzhou, China from 27.06 -29.06.2016
- June 26, 2016
- News
Jens Huhn, Group Managing Director of Ruwac Asia Group, gave a lecture during the first Suzhou dust explosion technology forum about “Prevention of dust explosions in dust collection systems and industrial vacuums when handling explosive, combusatbel or reactive suction media”. The speech also covered topics such as ATEX area zoning, European work safety regulations and risk assessment for dust collection systems.
