DS65600 Extractor System PGI Foods International Co.,Ltd., Thailand 2017

The DS64000 Extractor System with a 24m2 Cartridge Filter Class M is connected to 4 Suction Points whereas 2 suction points are operated at the same time. The purpose of this Extractor System is to extract airborne icing sugar powder from their mixer, filling station & sifting station. PGI Foods International Co.,Ltd. received a DS64000 Zone 22 Extractor System by Khun May (Right), Production Supervisor said that our RUWAC extractor system has decreased the dust cloud within the small production area, which resulted in a healthier more productive working environment. …

Read More

DS1750 Sludge Vacuum System 7.5kW Turbine Drive IRPC (Public) Co.,Ltd., Thailand 2017

IRPC operators used to clean this area by manually scooping up the heavy sludge on a monthly basis, which is a time consuming & physically demanding task to do the general Cleaning of waste polyethylene sludge with chemical liquids, oils & water. A DS1750 Sludge Vacuum with full automatic features has been implemented to clean sludge from 4x waste water pits on a weekly basis to reduce physical demand during cleaning task and safe time by reduce manpower from 5 operators to 2 operators. DS1750 7.5kW Turbine Drive, 2x 5m2 Oil …

Read More

DS1750 Silo Vacuum System Siam Kubota Metal Technology Co.,Ltd. Thailand 2017

Our customer Siam Kubota Metal Technology Co.,Ltd., Thailand have many steel shots by its nature have a very high specific weight making the material very heavy. By manually shoveling these steel shots, operator’s physical health is & operation downtime is effected. To reduce operation down time of collecting steel shots but Increase collection capacity to time ratio and also convenient discharge through bottom discharge valve into customer containers. The DS1750 Silo Vacuum System 7.5kW Turbine Drive, 4.5m2 Pocket Filter Class M, 160L Silo Container, manual heavy-duty bottom discharge valve is …

Read More

DS 1220 spark trap vacuum for aluminium car body sanding Autoland, Singapore 2016

The RUWAC DS 1220 sparktrap vacuum is the standard vacuum for aluminium body repair work shops certified by major Car producers such as Audi, Mercedes and BMW. The RUWAC spark trap vacuums can be used for a variety of vacuum and Dedusting tasks, where sparks are present in the suction air. For every ATEX vacuum the introduction of ignition sources with the suction air must be 100 % ruled out by the user. In situations, where this is not possible the spark trap vacuum can be one of the safe …

Read More

Concrete Dust Suction system for prefabricated houses production plant

In the production of seasoning powders any different ingredients are used, all having different properties. A detailed analysis is necessary in order to provide different customizing options to solve the different dust specification challenges. Dust extraction with flexible extraction arms directly at mixer charging stations where fly dust contaminates the area. Installing a certified dust extraction system with high efficient filtration and dust collection capability. The RUWAC Dust Extractor DS 6 serves as a dust collector that can be customized for standalone operation, as a mobile extractor or as a central dust extraction system/ dust …

Read More

Centralize Vacuum in car chassis production line Honda, Malaysia 2017

Honda, Malaysia have each operator had to work with a small standard vacuum with low capacity and small filters. The vacuum requires daily maintenance, filter changes and frequent replacement. The RUWAC industrial vacuum DS 1750 with high vacuum and airvolume with automatic start/stop control and piping system for several suction points to replacing existing small standard vacuums. Central Vacuum Systems always need very careful planning. This section can only provide examples of the most typical versions for Dedusting, Vacuum and Extraction applications with pipelines. Industries Automotive Parts Aerospace Industry Vehicles Application …

Read More

Complete Dust Control for metal work shop RUWAC Asia, Thailand 2014

RUWAC Asia Thailand also have the contamination of the machines by metal dust and chips, which are difficult to remove manually. Practice of the air gun cleaning is very dangerous and inefficient. To keep the workshop and metal working machines clean without using air gun and dedusting metal sparks dust during grinding process. We are using the RUWAC Central vacuum system with NA 250 wet separator for dust and sparks. SPS 35 for mobile cleaning of metal chips and coolant. Central vacuum system with 3 end cap connection points for …

Read More

Additive manufacturing

Using highly explosive metal powders creates new challenges in dust safety. One of the most rapidly growing and evolving markets happening in the industrial world right now. It’s cost-effective in terms of materials and productivity, and in many cases, it provides a greener solution that leaves less of a carbon footprint on the environment. It used to be that just those working with metals and plastics were taking advantage of this new technology, but each day, more and more industries from food production to biomedical breakthroughs— are finding the innovative way to integrate 3D printing into their …

Read More


Latest Projects



Industries

  • Machinery
  • Chemical
  • Metal Working
  • Paint
  • Construction
  • Animal Feed
  • Steel
  • Packaging