Ruwac Asia Blog
Centralize Vacuum in car chassis production line Honda, Malaysia 2017
- February 1, 2018
- Automotive Industry, Car body sanding and polishing, Central System, Success Stories, Vacuum cleaning of floors and surfaces
Honda, Malaysia have each operator had to work with a small standard vacuum with low capacity and small filters. The vacuum requires daily maintenance, filter changes and frequent replacement. The RUWAC industrial vacuum DS 1750 with high vacuum and airvolume with automatic start/stop control and piping system for several suction points to replacing existing small standard vacuums. Central Vacuum Systems always need very careful planning. This section can only provide examples of the most typical versions for Dedusting, Vacuum and Extraction applications with pipelines. Industries Automotive Parts Aerospace Industry Vehicles Application …
Complete Dust Control for metal work shop RUWAC Asia, Thailand 2014
- February 1, 2018
- Automotive Parts, Dedusting at source, Extraction of airborne dust, Machinery, Metal Industry, News, Steel, Success Stories, Vacuum cleaning of floors and surfaces, Vehicles
RUWAC Asia Thailand also have the contamination of the machines by metal dust and chips, which are difficult to remove manually. Practice of the air gun cleaning is very dangerous and inefficient. To keep the workshop and metal working machines clean without using air gun and dedusting metal sparks dust during grinding process. We are using the RUWAC Central vacuum system with NA 250 wet separator for dust and sparks. SPS 35 for mobile cleaning of metal chips and coolant. Central vacuum system with 3 end cap connection points for …
Glass Bead Chamber Vacuum System IWK (Thailand) Ltd, Thailand 2017
- April 8, 2017
- Application Category, Customer, Food Industry, Glass Bead Chamber Vacuum System, Industries, OEM, Pharmaceutical, Success Stories, Thailand, Vacuum cleaning of floors and surfaces
IWK (Thailand) Limited have the issue with they material Glass Bead with high specific weight ratio which makes it very heavy. It also can be reused several times in the coating process by manually collecting glass bead material on the ground, production downtime increased as well as physical fatigue for the operator. Before the RUWAC solution, a large dust collector was implemented in which its task is to extract airborne glass bead powders from the entire chamber; the results were not sufficient and the operator had visibility & breathing issues …
RUWAC / PUTZMAUS tube cleaning system for biomass boiler at Thai Asahi, Thailand 2016
- April 8, 2014
- Application Packages, Boiler Cleaning, Boiler cleaning, Foundry, Machinery, Metal Industry, OEM, ProPak Thailand, Putzmaus Boiler Cleaning, Success Stories, Thailand, Vacuum cleaning of floors and surfaces
Thai Asahi, Thailand has the problem with the old biomass boiler cleaning pole which has consume lots of time and man power for the cleaning process of the boiler. Two men power and one-hole day they have needed to clean the boiler. The PUTZMAUS boiler cleaning solution integrated with the RUWAC direct suction system makes regular cleaning of any kind of boiler tubes easy, efficient and environmental friendly. All residues are pushed to the front end of the tube by PUTZMAUS and are vacuumed into a pre-separation bin by …
